Description:
The CYMA AK105 is the latest addition to the Cyma's AK
line up of AEG. The receivers are solid metal and the stock/pistol
grip/hand guards are made of a durable ABS plastic. In addition to the
fantastic construction of the body CYMA has added the full size side
folding stock for easy storage and maneuverability. The internals are
the same as the other CYMA AK's so you know it's well made.
Specifications:
Manufacturer: Cyma
Muzzle Velocity: 350-375FPS
Magazine Capacity: 400 rounds
Package Includes: Battery, Charger, Gun, Magazine
NOTE: There WILL be an orange tip on this gun not shown in picture.
Please Note:
Disregard the manual in regards to charging
the battery. The battery for this gun should be charged 4 hours the first time
and 3 1/2 hours subsequent times. Make sure to check the battery every hour to
insure it is not too hot.
Monster Airsoft USA Battery/Charger
Disclaimer:
Do to the fact that most accessories that come with your
AEG (*namely the battery & charger) are low to mid-grade at best, we have chosen not
the include the cost of the accessories that come with your AEG. Since we
are giving the accessories away free of charge, we do not provide a
warranty on any accessory that comes with your AEG. We do offer high
quality batteries and smart chargers on our website that you can purchase separately.
Please let us know what model you are buying the battery for so we can point
you in the right direction. Any accessories you purchase separately do come
with our standard warranty.
The AK-47 (contraction of Russian: Автомат Калашникова образца 1947 года; Avtomat Kalashnikova obraztsa 1947 goda; "Kalashnikov's automatic rifle model of year 1947") is a 7.62 mm assault rifle developed in the Soviet Union by Mikhail Kalashnikov in two versions: the fixed stock AK-47 and the AKS-47 (S—So skladnym prikladom) variant equipped with an underfolding metal shoulder stock. Design work on the AK began in 1944. In 1946 the rifle was presented for official military trials, a year later the fixed stock version was introduced into service with select units of the Red Army (the folding stock model was developed later). The AK-47 was officially accepted by the Soviet Armed Forces in 1949. It is also used by the majority of the member states of the former Warsaw Pact. The AK-47 was also used as a basis for the development of countless many other types of individual and crew-served firearms. It was one of the first true assault rifles and, due to its durability and ease of use, remains the most widely used assault rifle in the world. More AK-type rifles have been produced than any other assault rifle.[2]
Design background
During World War II, the Germans developed the assault rifle concept, based upon research that showed that most firefights happen at close range, within 300 meters. The power and range of contemporary rifle cartridges was excessive for most small arms firefights. As a result, armies sought a cartridge and rifle combining submachine gun features (large-capacity magazine, selective-fire) with an intermediate-power cartridge effective to 300 meters. To reduce manufacturing costs, the 7.92x57mm Mauser cartridge case was shortened, the result of which was the lighter 7.92x33mm Kurz.
The resultant rifle, the Sturmgewehr 44 (StG44) was not the first with these features; its predecessors were the Italian Cei-Rigotti and the Russian Fedorov Avtomat design rifles. The Germans, however, were the first to produce and field sufficient numbers of this assault rifle to properly evaluate its combat utility. Towards the end of the war, they fielded the weapon against the Soviets; the experience deeply influenced Soviet military doctrine in the post-war years[citation needed].
Mikhail Kalashnikov began his career as a weapon designer while in a hospital after being wounded during the Battle of Bryansk.[4] After tinkering with a submachinegun design, he entered a competition for a new weapon that would chamber the 7.62x41mm cartridge developed by Elisarov and Semin in 1943 (the 7.62x41mm cartridge predated the current 7.62x39mm M1943). A particular requirement of the competition was the reliability of the firearm in the muddy, wet, and frozen conditions of the Soviet frontline. Kalashnikov designed a carbine, strongly influenced by the American M1 Garand, that lost out to the Simonov design that would later become the SKS battle rifle. At the same time, the Soviet Army was interested in developing a true assault rifle employing a shortened M1943 round. The first such weapon was presented by Sudayev in 1944; however in trials it was found to be too heavy.[5] A new design competition was held two years later where Kalashnikov and his design team submitted an entry. It was a gas-operated rifle which had breech-block mechanism similar to his 1944 carbine and curved 30-round magazine.
Kalashnikov's rifles (codenamed AK-1 and -2) proved to be reliable and the gun was accepted to second round of competition along with designs by A.A Demetev and F. Bulkin. In late 1946, as the guns were being tested, one of Kalashnikov's assistants, Aleksandr Zaytsev, suggested a major redesign of AK-1, particularly to improve reliability. At first, Kalashnikov was reluctant given that their rifle had already fared better than its competitors; however eventually Zaytsev managed to persuade Kalashnikov and the new rifle was produced for second round of firing tests and field trials. There, Kalashnikov assault rifle model 1947 proved to be simple, reliable under a wide range of conditions with convenient handling characteristics. In 1949 it was therefore adopted by the Soviet Army as '7.62mm Kalashnikov assault rifle (AK)'.[6]
Design concept
The main advantages of the Kalashnikov rifle are simple design, fairly compact size and adaptation to mass production. Mikhail Kalashnikov denies his assault rifle was based on the German Sturmgewehr 44 assault rifle despite circumstantial evidence to the contrary.[7] The AK-47 is best described as a hybrid of previous rifle technology innovations: the double locking lugs and unlocking raceway of the M1 Garand/M1 carbine,[8] the trigger and safety mechanism of the John Browning designed Remington Model 8 rifle,[9] and the gas system and layout of the StG44. Kalashnikov's team had access to all of these weapons and had no need to "reinvent the wheel".[10][11] Kalashnikov himself observed: "A lot of [Soviet Army soldiers] ask me how one can become a constructor, and how new weaponry is designed. These are very difficult questions. Each designer seems to have his own paths, his own successes and failures. But one thing is clear: before attempting to create something new, it is vital to have a good appreciation of everything that already exists in this field. I myself have had many experiences confirming this to be so."[12]
Receiver development history
AKS-47 on a Type 4B receiver (top), with a Type 2A.
AKS-47 on a Type 4B receiver (top), with a Type 2A.
There were many difficulties during the initial phase of production. The first production models had stamped sheet metal receivers. Difficulties were encountered in welding the guide and ejector rails, causing high rejection rates.[13] Instead of halting production, a heavy machined receiver was substituted for the sheet metal receiver.[14] This was a more costly process, but the use of machined receivers accelerated production as tooling and labor for the earlier Mosin-Nagant rifle's machined receiver were easily adapted. Partly because of these problems, the Soviets were not able to distribute large numbers of the new rifle to soldiers until 1956. During this time, production of the interim SKS rifle continued.[14]
Once manufacturing difficulties had been overcome, a redesigned version designated the AKM (M for "modernized" or "upgraded" — in Russian: Автомат Калашникова Модернизированный Avtomat Kalashnikova Modernizirovanniy) was introduced in 1959.[15] This new model used a stamped sheet metal receiver and featured a slanted muzzle brake on the end of the barrel to compensate for muzzle rise under recoil. In addition, a hammer retarder was added to prevent the weapon from firing out of battery (without the bolt being fully closed), during rapid or automatic fire.[16] This is also sometimes referred to as a "cyclic rate reducer", or simply "rate reducer", as it also has the effect of reducing the number of rounds fired per minute during automatic fire. It was also lighter than the previous model, at roughly one-third lighter.[15] Both licensed and unlicensed production of the Kalashnikov weapons abroad were almost exclusively of the AKM variant, partially due to the much easier production of the stamped receiver. This model is the most commonly encountered, having been produced in much greater quantities. All rifles based on the Kalashnikov design are frequently referred to as AK-47s in the West, although this is only correct when applied to rifles based on the original 3 receiver types.[17] In most former Eastern Bloc countries, the weapon is known simply as the "Kalashnikov". The photo above at right illustrates the differences between the Type 2 milled receiver and the Type 4 stamped, including the use of rivets rather than welds on the stamped receiver, as well as the placement of a small dimple above the magazine well for stabilization of the magazine.
In 1978, the Soviet Union began replacing their AK-47 and AKM rifles with a newer design, the AK-74. This new rifle and cartridge had only started being exported to eastern European nations when the Soviet Union collapsed, drastically slowing production of this and other weapons of the former Soviet bloc.
Receiver type Description
Type 1A/B Original stamped receiver for AK-47. -1B modified for folding stock. A large hole is present on each side to accommodate the hardware for the underfolding stock.
(this naming convention continues with all types)
Type 2A/B Milled from steel forging.
Type 3A/B "Final" version of the milled receiver, from steel bar stock. The most ubiquitous example of the milled-receiver AK-47.
Type 4A/B Stamped AKM receiver. Overall, the most-used design in the construction of the AK-series rifles.
Features
An Afghan National Police instructor using an AKS.
An Afghan National Police instructor using an AKS.
The AK is simple, inexpensive to manufacture, and easy to clean and maintain. Its ruggedness and reliability are legendary.[18][19] The AK-47 was initially designed for ease of operation and repair by glove-wearing Soviet soldiers in Arctic conditions. The large gas piston, generous clearances between moving parts, and tapered cartridge case design allow the gun to endure large amounts of foreign matter and fouling without failing to cycle. This reliability comes at the cost of accuracy, as the looser tolerances do not allow for precision and consistency. Reflecting Soviet infantry doctrine of its time, the rifle is meant to be part of massed infantry fire, not long range engagements. The average service life of an AK-47 is 20 to 40 years depending on the conditions to which it has been exposed.(pdf)
The notched rear tangent iron sight is adjustable, and is calibrated in hundreds of meters. The front sight is a post adjustable for elevation in the field. Windage adjustment is done by the armory before issue. The battle setting places the round within a few centimeters above or below the point of aim out to about 250 meters (275 yd). This "point-blank range" setting allows the shooter to fire the gun at any close target without adjusting the sights. Longer settings are intended for area suppression. These settings mirror the Mosin-Nagant and SKS rifles which the AK-47 replaced. This eased transition and simplified training.
The prototype of the AK-47, the AK-46, had a separate fire selector and safety.[20] These were later combined in the production version to simplify the design. The fire selector acts as a dust cover for the ejection port when placed on safe. This makes it easier to carry the AK-47 through difficult terrain because the operator only has to safe the firearm, and does not have to remember to close another latch to protect the operating mechanism.
The bore and chamber, as well as the gas piston and the interior of the gas cylinder, are generally chromium-plated. This plating dramatically increases the life of these parts by resisting corrosion and wear. This is particularly important, as most military-production ammunition during the 20th century contained corrosive mercuric salts in the primers, which mandated frequent and thorough cleaning in order to prevent damage. Chrome plating of critical parts is now common on many modern military weapons.
Operating cycle
To fire, the operator inserts a loaded magazine, moves the selector lever to the lowest position, pulls back and releases the charging handle, aims, and then pulls the trigger. In this setting, the firearm fires only once (semi-automatic), requiring the trigger to be released and depressed again for the next shot. With the selector in the middle position (full-automatic), the rifle continues to fire, automatically cycling fresh rounds into the chamber, until the magazine is exhausted or pressure is released from the trigger. As each bullet travels through the barrel, a portion of the gases expanding behind it is diverted into the gas tube above the barrel, where it impacts the gas piston. The piston, in turn, is driven backward, pushing the bolt carrier, which causes the bolt to move backwards, ejecting the spent round, and chambering a new round when the recoil spring pushes it back.[21]
Disassembly
Dismantling the rifle involves the operator depressing the magazine catch and removing the magazine. The charging handle is pulled to the rear and the operator inspects the chamber to verify the weapon is unloaded. The operator presses forward on the retainer button at the rear of the receiver cover while simultaneously lifting up on the rear of the cover to remove it. The operator then pushes the spring assembly forward and lifts it from its raceway, withdrawing it out of the bolt carrier and to the rear. The operator must then pull the carrier assembly all the way to the rear, lift it, and then pull it away. The operator removes the bolt by pushing it to the rear of the bolt carrier; rotating the bolt so the camming lug clears the raceway on the underside of the bolt carrier and then pulls it forward and free. When cleaning, the operator will pay special attention to the barrel, bolt face, and gas piston, then oil lightly and reassemble.[21]
Ballistics
The standard AK-47 or AKM fires a 7.62x39mm round with a muzzle velocity of 710 metres per second (2,329 ft/s). Muzzle energy is 2,010 joules (1,467 ft·lbf). Cartridge case length is 38.6 millimetres (1.5 in), weight is 18.21 grams (281.0 gr). Projectile weight is normally 8 grams (123 gr). The AK-47 and AKM, with the 7.62x39mm cartridge, have a maximum effective range of around 400 meters.
Variants
Kalashnikov variants include:
1952 AK-47
1952 AK-47
* AK-47 1948–51, 7.62x39mm — The very earliest models, with the Type 1 stamped sheet metal receiver, are now very rare.
* AK-47 1952, 7.62x39mm — Has a milled receiver and wooden buttstock and handguard. Barrel and chamber are chrome plated to resist corrosion. Rifle weight is 4.2 kg (9.3 lb).
* AKS-47 — Featured a downward-folding metal stock similar to that of the German MP40, for use in the restricted space in the BMP infantry combat vehicle, as well as by paratroops.
* RPK, 7.62x39mm — Squad automatic rifle version with longer barrel and bipod.
* AKM, 7.62x39mm — A simplified, lighter version of the AK-47; Type 4 receiver is made from stamped and riveted sheet metal (see schematic above). A slanted muzzle device was added to counter climb in automatic fire. Rifle weight is 3.1 kg (6.8 lb) due to the lighter receiver.
* AKMS, 7.62x39mm — Folding-stock version of the AKM intended for airborne troops. Stock may be either side- or under-folding
* AK-74 series, 5.45x39mm – See main article for details.
* AK-101 series
* AK-103/AK-104 series
* AK-107/AK-108 series
(Courtesy of Wikipedia)
|
